Standard Features


Handle your tough brush clearing applications easily with the Brushcat® rotary cutter. It mulches small branches and saplings up to three inches in diameter and cuts through the thickest grass and brush. Its powerful blades provide an excellent cutting and mulching action while maintaining the proper power to blade ratio. The Brushcat® rotary cutter is ideal for clearing undeveloped property, construction sites, power line access roads, trails, ditches, and more.


Model Year
72 in. Brushcat Rotary Cutter, High Flow
Request a Quote


92.92 in.
Deck: 86.5 in.
29 in.
75.8 in.
1,906 lbs.
Cutting Width
72 in.
Cutting Height
2 in.


Cutting Capacity
Brush material up to 3 in. (76 mm) in diameter
Blade Tip Speed
Maximum Flow: 21,191 fpm @ 32 gpm
Minimum Flow: 13,244 fpm @ 20 gpm

Standard Features

 Velocity Fuse Safeguards Hydraulic System   
    If the hydraulic capacity of the motor is exceeded, the velocity fuse installed on most Brushcat rotary cutter models will shut off the hydraulic flow to the cutter and limit potential damage to the system.  
 Flotation linkage allows the deck to float over ground contours, keeping it in contact with the surface for optimum performance.  
 Hydraulic Pressure Gauge Indicates Operating Pressure of Loader  
    A hydraulic pressure gauge, located on the rotary cutter and visible from the operator seat, indicates the operating pressure range of the loader. The pressure gauge ranges are signified by green, yellow, and red color codes - allowing operators to monitor and maintain optimal carrier travel speed and improving efficiency.  
 Patented Blade Shutoff  
    The device stops blade rotation when the rotary cutter is raised off the ground.  
 Double-Edged Blades Provide Increased Blade Life  
    double-edge blades provide bidirectional cutter rotation to increase blade life. This is achieved by switching the hydraulic hoses at the drive motor.  
 Hydraulic Drive Eliminates Shear Pins and Drive Clutches  
    The hydraulic drive dampens impact loads and eliminates the need for shear pins or drive cluthes.  
 Easy-to-open top cover allows instant access to the drive components and maintenance areas.  
 Bob-Tach Mounting System  
    The Brushcat rotary cutter can easily be connected and disconnected by means of the Bob-Tach mounting system (usually in one minute or less).  
 Meets SAE and ASAE Standards  
    Bobcat Brushcat rotary cutters comply with SAE J232 and ASAE S483 standards for industrial rotary cutters.  
 Standard equipped front rollers allow attachment to better traverse uneven terrain while reducing operator fatigue.  
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

Featured Inventory